Products

OSCILLOSCOPES

Oscilloscopes, also called Digital Storage Oscilloscopes (DSOs) or Mixed Signal Oscilloscopes (MSOs), are a common type of test instrument used to capture, analyze, and troubleshoot electrical or real world physical signals. Oscilloscopes observe the change of electrical signals over time, continuously graphed on a display as voltage or amplitude vs. time. During observation, oscilloscopes can analyze waveforms parametrically (i.e. frequency, RMS, peak-to-peak amplitude, rise time, etc.) Non-electrical signals, especially mechatronic signals such as vibration, strain, temperature, or current can be converted to voltages and displayed.

Yokogawa oscilloscopes deliver a range of bandwidths, the world's only eight channel and sixteen channel (plus logic) oscilloscopes, unparalleled suites of triggers and signal analysis, and a unique ability to save multiple triggered-events to "History" memory.

Filter

Name	Description	Category
YOKOGAWA B9850NX DL PRINTER PAPER	Quality paper for the DLM6000/DL9700/DL9500/DL1700(E)/DL1600/DL1500 and DL7400Paper width: 112 mmPaper length: 30 mOrder Q’ty: 5 (1set)	OSCILLOSCOPE ACCESSORIES
YOKOGAWA BROWSER ATTACHMENTS 701915	This attachment set can be used with PBA2500 and PBD2000. Spring pin (straight) x 4Spring pin (angle) x 4Pin (straight) x 20Pin (angle) x 20Pin (L shape) x 2Micro Clip (black) x 1Micro Clip (red) x 1Single lead (black) x 1Single lead (red) x 1	OSCILLOSCOPE ACCESSORIES
YOKOGAWA PROBE STAND 701919	Using a probe stand with a flexible arm and heavy base to hold and stabilize probes can simplify circuit board testing, A probe stand gives you stable, pinpoint probing control for high density or three handed operations.	OSCILLOSCOPE ACCESSORIES
YOKOGAWA DELUXE INSTRUMENT CART 701961	Deluxe instrument cart570 mm (W) x 580 mm (D) x 839 mm (H)/A option: keyboard, mouse table/B option: comes with a 3-prong power strip	OSCILLOSCOPE ACCESSORIES
YOKOGAWA DESKEW CORRECTION SIGNAL SOURCE 701936	When using different types of probes, such as a voltage probe and a current probe, a small propagation delay difference exists between the probe pair. Small, but significant, this difference is caused by each probe's unique internal circuitry and cable length. This propagation delay difference is known as ‘skew' and creates an error when calculating switching loss or measuring timing. In the high speed switching of the switching power supply, the engineer is required to measure the timing of...	OSCILLOSCOPE ACCESSORIES
YOKOGAWA 1:1 BNC SAFETY ADAPTER LEAD 701901	1000 Vrms-CAT II, 1.8 m longSafety BNC(male) to safety banana(female) use in combination with 701959, 701954, 758921, 758922 or 758929.Applicable for DL750/DL750P, SL1000, SL1400	OSCILLOSCOPE ACCESSORIES
YOKOGAWA BNC CABLE 366925	BNC-BNC 2m. For connection to simultaneously measurement with 2 units, or for input external trigger signal.	OSCILLOSCOPE ACCESSORIES
YOKOGAWA SPEAKER CABLE 701952	For playing voice memos.	OSCILLOSCOPE ACCESSORIES
YOKOGAWA D-SUB BRIDGE HEADS 701957/701958	D-sub cable (5 m) includedSupports Shunt-Cal Bridge resistance: 120Ω (701957) 350Ω (701958) Applicable for DL850 series, DL750/DL750P, SL1000 & SL1400.	OSCILLOSCOPE ACCESSORIES
YOKOGAWA ACTIVE PROBE 701912/13/14	701912 PBA1000 Active Probe, 25Vp, 2.0GHz, 10:1, 100kΩ, w/ Yokogawa Probe Interface701914 PBA1500 Active Probe, 25Vp, 1.5GHz, 10:1, 100kΩ, w/ Yokogawa Probe Interface701913 PBA2500 Active Probe, 25Vp, 2.5GHz, 10:1, 100kΩ, w/ Yokogawa Probe Interface Fits Yokogawa scope Probe Interface Only: This includes DLM2000, DL6000, DLM6000, DL9000, SB5000	OSCILLOSCOPE ACCESSORIES
YOKOGAWA B9969ET SOFT CASE FOR THE DL7400 SERIES	Ideal for storing accessories (probes, etc).	OSCILLOSCOPE ACCESSORIES
YOKOGAWA B9918EZ SOFT PROBE CASE FOR DL1600,1700E SERIES	For storing accessories (probes, etc). It can be attached on the side of the DL1600 and 1700E series.	OSCILLOSCOPE ACCESSORIES
YOKOGAWA B9852HF BASIC ACCESSORIES SET FOR THE 701941 PROBE	11 accessories have been included in this set (See below ). The B9852HF contains the following eleven(11) kinds of accessories. (Insulation cap, IC cap, BNC adapter, Rigid tip, Spring tip (Ø: 0.80 mm), Spring tip (Ø: 0.38 mm), Ground spring, Adjustment tool, Pincher tip, Standard ground lead, Color coding rings)PBL5000	OSCILLOSCOPE ACCESSORIES
YOKOGAWA DC POWER CORD 701970	For the DC power supply model (/DC).Cigarette lighter plug type1.8 m long	OSCILLOSCOPE ACCESSORIES
YOKOGAWA RACK MOUNT KIT FOR DLM4000 - 701969	Rack mount kit for DLM4000 series.EIA/JIS sandard compliant.	OSCILLOSCOPE ACCESSORIES
YOKOGAWA B9852MJ POWER CABLE	The B9852MJ cable supplies power to the 700924, 700925 and 701921 differential probes* from the DL probe power con-nectors. (The probe power option is re-quired on the DL unit.) * Cable only works with newer 700924, 700925 and 701921 probes that indicate "6VDC or 9VDC"at the probe input power connector.	OSCILLOSCOPE ACCESSORIES
YOKOGAWA SOFT CARRYING CASE FOR DLM4000 701968	Three pockets are provided for storing accessories and the user’s manual.	OSCILLOSCOPE ACCESSORIES
YOKOGAWA SOFT CARRYING CASE FOR DL1600/DL1700E SERIES 701964	Three pockets are provided for storing accessories and the user’s manual. Roomy enough to store the DC power supply model and the battery box.	OSCILLOSCOPE ACCESSORIES
YOKOGAWA ALL-PURPOSE INSTRUMENT CART 701962	All-purpose instrument cart467 mm (W) x 693 mm (D) x 713 mm (H)	OSCILLOSCOPE ACCESSORIES
YOKOGAWA PROBE POWER SUPPLY 701934	A power supply for current probes, FET probes, and differential probes. Supplies power for up to four probes, including large current probes.	OSCILLOSCOPE ACCESSORIES