You have 0 items in your cart.
By Brands
Brands
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
DKK-TOA CLBM-50 | Residual Chlorine Analyzer CLBM-50 Ultracompact DIN 48 size Reagenless model Auto-cleaning by polishing beads and micro-vibrating electrode Power supply: 100 - 230VAC Low power consumption of 5VA Meas. range 0 - 3 mg/L | Reagentless Free Chlorine Analyzer |
|
|
|
DKK- TOA CLD-7M | Measures chloride demand of water and estimates chlorine injection level; best suited for feed forward control Meas. range From 0 - 5 mg/L to 10 mg/L （ppm） From 0 - 10 mg/L to 20 mg/L （ppm） | Chloride Demand Analyzer |
|
|
|
DKK-TOA COL-110 | Color and turbidity can be measured simultaneously by dual wavelength with just one meter Equipped with interactive easy-to-use color touch panel Meas. range Color: 0 - 10/20/30 (degrees C, DEG) Turbidity: 0 - 2/4/5/10 (degrees C, mg/L, ppm) | Colorimeter/Turbidity Meter |
|
|
|
DKK-TOA TUF-1600 | Suitable for water purification process (including river water, etc.) Surface scattering light method employed; 1 range/2 ranges/3 ranges available Reduces flow volume of sample water to 1/2 of existing models RS-485 equipped as standard specification; compatible with Modbus communication system Freely mountable on walls, racks, etc. for the compact lightweight design Meas. range 0 - 2 to 0 - 2000 (1 - 3 ranges) (mg/L, ppm, FTU, NTU) | Turbidity Analyzer |
|
|
|
DKK-TOA TUH-1600 | High Sensitivity Turbidity Analyzer TUH-1600 Highly-sensitive turbidity analyzer suitable for water purification process Surface scattering light method employed; 1 range/2 ranges/3 ranges available RS-485 equipped as standard specification; compatible with Modbus communication system Freely mountable on walls, racks, etc. for the compact lightweight design Meas. range 0 - 0.2 to 0 - 2.0 (1 - 3 ranges) (NTU) | Turbidity Analyzer |
|
|
|
DKK-TOA TUI-100 | Turbidity Meter with Integrating Sphere TUI-100 Integrating sphere system employed for lab turbidity measurements Continuous measurement of turbidity in tap water, river water, industrial water, etc. Accurate results for minimized influence of color Meas. range 0 - 0.5/5 to 0 - 100/1000 Cell length: 50mm or 10mm (selectable) (mg/L, ppm, FTU, NTU) | Turbidity Analyzer |
|
|
|
DKK-TOA COL-110 | Colorimeter/Turbidity Meter COL-110 Color and turbidity can be measured simultaneously by dual wavelength with just one meter Equipped with interactive easy-to-use colortouch panel Meas. range Color: 0 - 10/20/30 (degrees C, DEG) Turbidity: 0 - 2/4/5/10 (degrees C, mg/L, ppm) | Turbidity Analyzer |
|
|
|
DKK-TOA SSD-1610(For Low Concentration)/SSD-1620(For Medium Concentration) | Compact and piston automated analyzer Types of detectors available: immersion, drop-in and pipe insertion Long-life optical model and high reliability RS-485 interface equipped as standard specification; compatible with Modbus communication system Meas. range SSD-1610: 0 - 30/500/1000 mg/L SSD-1620: 0 - 5000/10000/20000 mg/L (3-range, manual switching) | Suspended Solids Concentration Analyzer |
|
|
|
DKK-TOA SSF-1600 | Continuous optical measurements of SS and MLSS by using infrared scattering method Safe and simple maintenance attainable with the small, lightweight stainless detector Meas. range 0 - 1000/3000 mg/L 0 - 10000/20000/30000 mg/L (2-ranges or 3-ranges) | Suspended Solids Concentration Analyzer |
|
|
|
DKK-TOA ALF-1600 | Continuous measurement of alkalinity data in water purification process by coulometric titration method Requires only 1/4 reagent volume of existing model RS-485 equipped as standard specification; compatible with Modbus communication system Freely mountable on walls, racks, etc. for the compact lightweight design Meas. range 0 - 50/100 mg/L (ppm) (2-ranges) | Alkalinity Analyzer |
|
|
|
DKK-TOA FS-3 | The cleaning process done by two filters alternately allows for continuous supply of sample Filtration rate 1 - 6 L/min (Varies from sample turbidity) | Sand Filter |
|
|
|
DKK-TOA BSC | A complete sampling system composed with cooler, pressure reducer, valves, flowmeter and thermostat chambers Enables sampling for analysis from the boiler Consistent manufacturing from analyzer to sampler Sample condition Maximum temperature: 600 degrees C Maximum pressure: 30 MPa Maximum flow rate: 3 L/min | Boiler Sampling System |
|
|
|
DKK-TOA HYM-300 | Continuous measurement of hydrazine concentration in boiler water Stabilization determination function during calibration Best suited for monitoring of residual hydrazine concentration Meas. range 0 - 999.9 μg/L | Hydrazine Transmitter |
|
|
|
DKK-TOA EMNA-10 | Continuous measurement of Na+ ion concentration of boiler water at ppb level Auto self-detection of degradation of ion-exchange system Meas. range 0 - 0.1/1 - 100/10 - 1000 ppb (manual swtiching) | Sodium Ion Monitor |
|
|
|
DKK-TOA BPM-2000 | Designed for oil refinery Automatic fractional distillate analyzer of batch distillation type enables distillation test of petroleum products such as kerosene, diesel oil, gasoline and etc. Adopts high resolution liquid level detecting sensor Newly-developed FA computer embedded with large-sized, color touch panel Explosion-proof TIIS fd2G4 certified Meas. range Standard：Light gas oil (0 - 400 degrees C), Kerosene (0 - 300 degrees C), Gasoline (0 - 200degrees C) | Boiling Point Analyzer |
|
|
|
DKK-TOA FPA | Designed for oil refinery Batch continuous analysis of flash point of petroleum products such as light gas oil, kerosene and gasoline Best suited for management of plant and product control Explosion-proof TIIS d2G4 certified Meas. range 0 - 100 degrees C | Flash Point Analyzer |
|
|
|
DKK-TOA PPA | Designed for oil refinery Continuous measurement of pour point which is used as indication of light oil and intermediate fraction of fuel oil A Best suited for management of plant and product control Explosion-proof TIIS d2G4 certified Meas. range -30 - +20 degrees C | Pour Point Analyzer |
|
|
|
DKK-TOA CFPP | Designed for oil refinery Continuous measurement of plugging pour point which is used as indication of light oil and intermediate fraction of fuel oil A Best suited for management of plant and product control Explosion-proof TIIS d2G4 certified Meas. range -30 - +20 degrees C | Cold Filter Plugging Point Analyzer |
|
|
|
DKK-TOA CPA-21 | Designed for oil refinery Measures cloud point of petroleum products like gas-oil continuously Best suited for management of plant and product control Explosion-proof TIIS d2G4 certified Meas. range -30 - +20 degrees C | Cloud Point Analyzer |
|
|
|
DKK-TOA DVP-03 | Designed for oil refinery Measures vapor pressure of petroleum products like gasoline Vapor pressure is measured by measuring static pressure of the sample that is jetting out from the nozzle at the constant temperature Measurement result attained via Reid method for vapor pressure Meas. range 0.01 - 1 MPa abs 0 - 0.15 MPa abs | Vapor Pressure Analyzer |
|