|
Fluke 375 600A/600V True-RMS AC/DC Clamp Meter with Frequency Measurement
|
|
600A AC and DC current measurement with fixed jaw
2500 A ac current measurement with iFlex flexible current probe (sold separately)
600 V ac and dc voltage measurement
True-rms ac voltage and current for accurate measurements on non-linear signals
Resistance measurement to 60 kΩ with continuity detection
Min, max, average and inrush recording to capture variations automatically
500 mV dc measurement range to interface with other
CAT IV 600V, CAT III 1000 V safety rating
Frequency... |
AC Leakage Clamp Meter
|
|
|
Fluke 376 1000A/1000V True-RMS AC/DC Clamp Meters
|
|
1000 A AC and DC current measurement with fixed jaw
2500 A AC current measurement with iFlex flexible current probe
1000 V AC and DC voltage measurement
True-rms ac voltage and current for accurate measurements on non-linear signals
Frequency measurement to 500 Hz with both jaw and iFlex
60 kΩ resistance measurement with continuity detection
Min, max, average and inrush recording to capture variations automatically
500 mV dc measurement range to interface with other accessories
1000... |
AC Leakage Clamp Meter
|
|
|
Fluke 381 Remote Display True-rms AC/DC Clamp Meter with 18-inch iFlex
|
|
1000 A AC/DC current measurement with fixed jaw
2500 A AC current measurement with iFlex flexible current probe
1000 V ac and dc voltage measurement
True-RMS AC voltage and current for accurate measurements on non-linear signals
Frequency measurement to 500 Hz with both jaw and iFlex
60 kΩ resistance measurement with continuity detection
Min, max, average and inrush recording to capture variations automatically
Wireless technology allows the display to be carried up to 30 ft away from... |
AC Leakage Clamp Meter
|
|
|
Fluke 360 AC Leakage Clamp Meter
|
|
Measurement of leakage current with 3 mA range and 1 µA of resolution, for accurate monitoring of insulation erosion
Broad range of measurement, from 1 µA up to 60 A, for all installation needs
Advanced shielding to ensure accurate results when measuring near other conductors
The high durability clamp construction can withstand over 50,000 operations - added ruggedness that extends the life of your clamp
Easy-to-carry, pocket-sized clamp with wide 40 mm (1.5 in) jaw size
Handy... |
AC Leakage Clamp Meter
|
|
|
Fluke 345 Power Quality Clamp Meter
|
|
AC/DC current: Clamp-on measurement of ac current up to 1400 A rms and dc current up to 2000 A without breaking the circuit
Highest safety rating: 600 V CAT IV power analyzer is rated for use at the service entrance
Accurate in noisy environments: Clamp meter performs even with distorted waveforms present on electronic loads with low-pass filter
Data logging: Identify intermittent faults by logging any power quality parameter for minutes, or over a month, including harmonics
Verify... |
AC Leakage Clamp Meter
|
|
|
Fluke 902 True-rms HVAC Clamp Meter
|
|
Designed for HVAC applications with capacitance, DC Current (µA), and temperature measurements
Small body and jaws fit perfectly in your hand and into tight places
Handy 'Display Hold' button keeps measurements on the display
Meter controls are positioned so current measurements can be done with one hand (index finger on clamp opening lever and thumb on rotary switch)
Large, backlit display (on most models) is easy-to-see
Auto shut-off maximizes battery life so the meter works when... |
AC Leakage Clamp Meter
|
|
|
Fluke 771 Milliamp Process Clamp Meter
|
|
Measure mA signals for PLC and control system analog I/O
Measure 4 to 20 mA output signals from transmitters without breaking the loop
Best in class 0.2 % accuracy
Resolution and sensitivity to 0.01 mA
Hold function captures and displays changing measurements
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight illuminates hard to see wires in dark enclosures
Detachable clamp with extension cable for measurements in tight locations... |
AC Leakage Clamp Meter
|
|
|
Fluke 772 Milliamp Process Clamp Meter
|
|
Measure 4 to 20 mA signals without ”breaking the loop” just like the innovative and popular Fluke 771 Process Milliamp Clamp meter
Source 4 to 20 mA signals for testing control system I/O or I/Ps
Simulate 4 to 20 mA signals for testing control system I/O
Measure 4 to 20 mA signals with in-circuit measurement
Simultaneously measure mA in-circuit with 24 V loop power for powering and testing transmitters
Source mA output signals in a linear ramp or 25 % step output– Automatically... |
AC Leakage Clamp Meter
|
|
|
Fluke 773 Milliamp Process Clamp Meter
|
|
DC voltage measurement to verify 24 V power supplies or voltage I/O signals
Source DC voltage to test input devices that accept a 1 to 5 volt or 0 to 10 volt signal
Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp
Output mA signal enables a logging DMM or other device to record the 4 to 20 mA signal without breaking the loop
mA in/out: simultaneously measure the mA signal with the clamp and source a mA... |
AC Leakage Clamp Meter
|
|
|
Fluke 922 and 922/Kit Airflow Meter/Micromanometer
|
|
Powerful meter provides differential and static pressure, air velocity and flow readings
Convenient colored hoses help proper interpretation of pressure readings
Easy to use without sacrificing performance
Bright, backlit display for clear viewing in all environments
User-defined duct shape and size for maximum airflow accuracy
Resolution down to 0.001 in H2O
99 point data storage capacity
Min/Max/Average/Hold functions for easy data analysis
Auto power off saves battery life
|
Air Quality Testers
|
|
|
Fluke 971 Temperature Humidity Meter
|
|
Backlit dual display of humidity and temperature
Measures dew point and wet bulb temperatures
99 record storage capacity
Ergonomic design with belt clip and protective holster
Quick-response capacitance sensor with twist-open protective cover
Compact and lightweight (188 g/6.6 oz)
Temperature range from -20 °C to 60 °C (-4°F to 140 °F)
Relative humidity from 5 % to 95 %
Min/Max/Avg Data hold
Low battery indicator
|
Air Quality Testers
|
|
|
Fluke 975 and 975V AirMeter
|
|
Simultaneously measures, logs, and displays temperature, humidity, CO2, and CO on a bright, backlit LCD display
One-touch air flow and velocity with available probe (Included with Fluke 975V, optional with Fluke 975)
Wet bulb and dew point temperature
% of outside air calculation
CO2 and CO field calibration feature
Self-test function at startup
Auto-backlight
Automatically compensates for barometric pressure changes
Min/Max/Average on all measured and calculated... |
Air Quality Testers
|
|
|
Fluke 985 Six channel Particle Counter, 0.3 μm to 10 μm Range
|
|
Six channels and particle size range 0.3 μm to 10 μm
Ultra-lightweight and ergonomic design for easy single-hand operation
Ten hours of standard-use battery life
Large 3.5 inch QVGC color display with backlight, intuitive icons, and large font options
10,000 records stored for easy access to historical data
Data can be viewed in traditional tabular or trend graph
Configurable display, sample methods, and alarm setting for sample size count (raw count, per cubic feet, cubic meter, or... |
Air Quality Testers
|
|
|
Fluke 8808A 120V, 5.5 Digital Bench Multimeter
|
|
5.5 digit resolution
Dual Display
Measures V dc/ac, I dc/ac, Ω, Freq, Continuity, Diode
Basic V dc accuracy of up to 0.015%
Min, Max, Rel, dB, dBm
2x4 Wire Ohms measurement technique
Dedicated dc leakage current ranges
Six dedicated buttons for fast access to instrument setups
Hi/Lo limit compare for Pass/Fail testing
|
Benchtop Multimeters
|
|
|
Fluke 8845A 6.5 Digit Precision Digital Bench Multimeter, 35 ppm
|
|
6.5 digit resolution
Basic V dc accuracy of up to 0.0035 %
Dual display
100 μA to 10 A current range, with up to 100 pA resolution
Wide ohms range from 10 Ω to 1 GΩ with up to 10 μΩ resolution
2 x 4 ohms 4-wire measurement technique
Measures frequency and period
Fluke 45 and Agilent 34401A emulation
Graphical display
Trendplot paperless recorder mode, statistics, histogram
CAT I 1000 V, CAT II 600 V
For the 24 ppm Model See Fluke 8846A
|
Benchtop Multimeters
|
|
|
Fluke 8846A 6.5 Digit Precision Digital Bench Multimeter, 24 ppm
|
|
6.5 digit resolution
Basic V dc accuracy of up to 0.0024 %
Dual display
100 μA to 10 A current range, with up to 100 pA resolution
Wide ohms range from 10 Ω to 1 GΩ with up to 10 μΩ resolution
2 x 4 ohms 4-wire measurement technique
Both models measure frequency and period
Measures capacitance and temperature
USB memory drive port
Fluke 45 and Agilent 34401A emulation
Graphical display
Trendplot paperless recorder mode, statistics, histogram
CAT I 1000 V, CAT II 600 V
For... |
Benchtop Multimeters
|
|
|
Fluke 705 Loop Calibrator
|
|
A large display and simple, pushbutton interface for ease of use.
Simultaneous mA and % readout for quick, easy interpretation of readings.
mA accuracy of 0.02%
Push button 25% steps for fast, easy linearity checks. Save time over traditional knob type controls.
"Span Check" for fast confirmation of zero and span.
Selectable slow ramp, fast ramp, and step to provide smooth outputs for valve slewing and loop functional tests.
24 volt internal loop supply, so you can power and read a... |
Calibrators
|
|
|
Fluke 707 Loop Calibrator
|
|
Large display and simple, quick-click interface for easy one-handed operation
Simultaneous mA and % readout for quick, easy, interpretation of readings
mA accuracy of 0.015%, superior to other loop calibrators in this price range
1µA resolution for mA source, simulate and measure
Push button 25% steps for fast, easy linearity checks
0-100% "span check" for fast confirmation of zeroand span
Measures V dc to 28 V
Selectable slow ramp, fast ramp, and step ramp to provide smooth outputs... |
Calibrators
|
|
|
Fluke 707EX Intrinsically Safe Loop Calibrator
|
|
ATEX Intrinsic Safe Certification for use in classified areas.
Large display and simple, quick-click push rotary button for easy one-handed operation
Simultaneous mA and % readout for quick, easy, interpretation of readings
mA accuracy of 0.015 %, superior to other loop calibrators
1 µA resolution for mA source, simulate and measure
Push button with 25 % steps for fast, easy linearity checks
0-100 % "span check" for fast confirmation of zero and span
Selectable slow ramp, fast... |
Calibrators
|
|
|
Fluke 712 RTD Process Calibrator
|
|
Measure temperature from RTD output
Simulate RTD output
Operates with seven types of RTDs
Measure additional RTDs using Ohms measurement function
Simulate additional RTDs using Ohms source function
°F or °C selectable
Four shrouded banana jacks
Compatible with Rosemount® pulsed RTD transmitters(pulses > 100ms)
|
Calibrators
|
|