|
Fluke Networks TS22 and TS22A Telephone Test Set
|
|
Tone (DTMF) and pulse operation
Last number redial
DTMF signal levels compensated for loop length
DropSafe™ unit up to 20 feet
Audible electronic ringer
Locking mute switch
3-year redial storage time
Over voltage and over current protection
PBX pause button
Field replaceable belt clip
Continuous polarity LED indications
For use with computerized voice response systems
Stores nine 18-digit numbers in repertory dialer (speed dialing)
RainSafe™ ruggedness for use in... |
Telephone Test Sets / Butt Sets
|
|
|
Fluke Networks OptiView Series III Integrated Network Analyzer
|
|
802.1X authentication
Gigabit line rate capture, traffic
Generation and Internetwork Throughput
Free string match filtering and triggers with the ability to control capture and provide detailed event analysis
VLAN trunk analysis
Infrastructure device analysis using SNMPv3
Application Troubleshooting
Expert option validates network services and provides detailed application flow analysis
Management port for out of band remote control
|
Network Analyzers and Testers
|
|
|
Fluke Networks MS2-100 MicroScanner2 Cable Verifier with MS2-KIT and MS2-TTK Kits
|
|
Revolutionary Interface – Graphical wiremap, length, cable ID, and distance to fault displayed on one screen
Multimedia Support – Tests all common media types including RJ11, RJ45, Coax, with no need for adapters
IntelliTone Toning – Locates virtually any cable or wire pair with IntelliTone digital and analog toning
VDV Service Detection – Verifies today's media services, including 10/100/1000 Ethernet, POTS, and PoE
Rugged Housing – Integrated rubber holster enhances grip... |
Copper Cable Test Solutions
|
|
|
Fluke 365 True-rms AC Clamp Meter with Detachable 18mm Jaw
|
|
200A ac and dc current measurement with detach-able jaw
600V ac and dc voltage measurement
True-rms ac voltage and current for accurate measurements on non-linear signals
6000Ω resistance measurement with continuity detection
Detachable jaw makes accessing wires and viewing the display easier
Built in flashlight/torch allows for easy illumination and identification of wires
CAT III 600V safety rating
Compact design fits in your hand and can be used while wearing personal protective... |
AC Leakage Clamp Meter
|
|
|
Fluke Networks CFP-100-S CertiFiber Pro Singlemode OLTS Kit (LC Style)
|
|
Versiv's modular design supports copper certification, fiber loss, OTDR testing and fiber end-face inspection
Taptive user interface provides simple, animated guidance to eliminate incorrect reference setup and “negative loss” errors.
Fastest time to certify – two fibers at two wavelengths in three seconds.
Encircled Flux compliant as required by ANSI/TIA and ISO/IEC with no additional test cords
Merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with... |
Fiber Certification and Testing
|
|
|
Fluke Networks Inline Aggregating Filter Taps
|
|
Increase the visibility and performance of network monitoring and analysis devices
Share information between multiple departments
Reduce the number of monitoring and analysis devices needed to effectively manage your network
Gain access to full-duplex and meshed network traffic for multiple analysis devices
Improve the performance of network analysis solutions using hardware-based filtering within the tap
Eliminate the possibility of dropped packets by filtering for only relevant... |
Taps
|
|
|
Fluke BP189 High Capacity Battery Pack for Fluke 180 Series DMM
|
|
Attach this battery pack to your Fluke 189 to use 4 ‘C’ cell batteries instead of the ‘AA’ cell batteries
CAT III 1000 V, CAT IV 600 V
One Year Warranty
Batteries and meter sold separately
|
Batteries, Charges and Adapters
|
|
|
Fluke 971 Temperature Humidity Meter
|
|
Backlit dual display of humidity and temperature
Measures dew point and wet bulb temperatures
99 record storage capacity
Ergonomic design with belt clip and protective holster
Quick-response capacitance sensor with twist-open protective cover
Compact and lightweight (188 g/6.6 oz)
Temperature range from -20 °C to 60 °C (-4°F to 140 °F)
Relative humidity from 5 % to 95 %
Min/Max/Avg Data hold
Low battery indicator
|
Air Quality Testers
|
|
|
Fluke Networks PTNX2 Pocket Toner Coax Cable Tester with LED Display
|
|
Displays 5 different test results
Low voltage protection for both the main body and detachable toner unit
Dual audible indicators
Bi-gender adaptable toner section
Removable push-on connector
Removable Speed 81 connector
Lightweight, durable anodized aluminum
Auto shut off
Replaceable parts
Uses one AAA battery
One-year warranty
|
Coax Cable Testers
|
|
|
Fluke OC4USB USB Interface Cable
|
|
Supports the Fluke 120 Series, Fluke 190 Series ScopeMeters, as well as the 43 and 43B and 430 Series Power Quality analyzers
Supports Windows Vista/ XP/2000/Me/98 SE
Cable length 1.5 m (4.9 ft)
|
Cables & Hardware
|
|
|
Fluke Networks D814 Deluxe All-In-One Impact Tool
|
|
Industry standard
Incredibly durable with lifetime warranty
Accepts standard industry blades
Lightweight and easy to use
Adjustable spring impact mechanism allows low impact for 24 and 26 gauge wire or high impact for 22 gauge wire
Convenient blade storage built into the end of the handle
Easy blade insertion (locks in place)
|
Tools and Test Kits
|
|
|
Fluke C116 Soft Carrying Case
|
|
Includes adjustable padded space with a moveable Velcro divider for protection of two test tools, such as a digital multimeter and a current probe.
Durable polyester 600D case construction for long life.
Compatible with Fluke 20, 70, 11X, 87V, 170 Series digital multimeters and other similar format test tools.
One-year warranty.
|
Cases and Holsters
|
|
|
Fluke 8845A 6.5 Digit Precision Digital Bench Multimeter, 35 ppm
|
|
6.5 digit resolution
Basic V dc accuracy of up to 0.0035 %
Dual display
100 μA to 10 A current range, with up to 100 pA resolution
Wide ohms range from 10 Ω to 1 GΩ with up to 10 μΩ resolution
2 x 4 ohms 4-wire measurement technique
Measures frequency and period
Fluke 45 and Agilent 34401A emulation
Graphical display
Trendplot paperless recorder mode, statistics, histogram
CAT I 1000 V, CAT II 600 V
For the 24 ppm Model See Fluke 8846A
|
Benchtop Multimeters
|
|
|
Fluke 700-BCA Bar Code Adapter
|
|
Shielded four conductor cable terminated with a 9-socket D-subminiature connector and a 9-pin D-subminiature connector.
Provides interconnection and pin translation between a Fluke 743 Documenting Process Calibrator and a Hewlett Packard HBSW-8200 Bar Code Wand.
Overall length approximately 15 cm
One year warranty
|
Connectors
|
|
|
Fluke 707 Loop Calibrator
|
|
Large display and simple, quick-click interface for easy one-handed operation
Simultaneous mA and % readout for quick, easy, interpretation of readings
mA accuracy of 0.015%, superior to other loop calibrators in this price range
1µA resolution for mA source, simulate and measure
Push button 25% steps for fast, easy linearity checks
0-100% "span check" for fast confirmation of zeroand span
Measures V dc to 28 V
Selectable slow ramp, fast ramp, and step ramp to provide smooth outputs... |
Calibrators
|
|
|
Fluke 90i-610s 1A to 600A AC/DC Current Probe
|
|
Current Range: 1 to 600 A DC or AC Peak
Basic Accuracy (DC to 400 Hz): +/- (2% of reading + 1 A)
Output Signal: 100 A range: 10 mV/A | 600 A range: 1 mV/A
Frequency Range: 40 Hz to 400 Hz
Working Voltage: 600 V AC rms
Maximum Conductor Diameter: 34 mm (1.34 inch)
Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
|
Current Clamps
|
|
|
Fluke FOS-850 Fiber Optic Light Source
|
|
A variety of light sources allow you to test different cable lengths.
One year warranty
|
Fiber Optics
|
|
|
Fluke Silver Instrument CarePlan For Thermal Imagers
|
|
Repairs are always unexpected, and they can be costly. Keep your camera in top operating condition and control your cost of ownership with a Fluke Silver CarePlan. Maintain you camera in peak operating condition and protect your investment beyond your factory warranty for up to three additional years. |
CarePlans & warranties
|
|
|
Fluke 116 HVAC Multimeter with Temperature and Microamps
|
|
Built in thermometer for HVAC applications
Microamps to test flame sensors
LoZ: helps prevent false readings due to ghost voltage
Large white LED backlight to work in poorly lit areas
Resistance, continuity, frequency and capacitance
Min/Max/Average with elapsed time to record signal fluctuations
Compact ergonomic design for one-handed operation
Compatible with optional magnetic hanger (ToolPak™)
CAT III 600 V safety rated
|
Combo Test Kits
|
|
|
Fluke 80K-15 High Voltage Probe
|
|
Voltage Range: 0 to 15kV DC or peak AC, 10kV rms
AC Basic Accuracy: DC +/- 2% 60Hz: +/- 5%
Division Ratio: 1000:1
Safety Standards: IEC 1010-2-031:1993, Type B, 40 kV DC or peak AC, 28kV rms AC, Overvoltage Category I (voltage derived from limited energy transformer).
Input Resistance: 1000 Megohm
Required Meter Input Resistance: 10 Megohm
|
High Voltage Probes
|
|