|
Fluke Networks PTNX1 Pocket Toner Coax Cable Tester
|
|
Low voltage protection for both the main body and detachable toner unit
Dual audible indicators
Bi-gender adaptable toner section
Removable push-on connector
Removable Speed 81 connector
Lightweight, durable anodized aluminum
Auto shut off
Replaceable parts
Uses one AAA battery
One-year warranty
|
Coax Cable Testers
|
|
|
Fluke 922 and 922/Kit Airflow Meter/Micromanometer
|
|
Powerful meter provides differential and static pressure, air velocity and flow readings
Convenient colored hoses help proper interpretation of pressure readings
Easy to use without sacrificing performance
Bright, backlit display for clear viewing in all environments
User-defined duct shape and size for maximum airflow accuracy
Resolution down to 0.001 in H2O
99 point data storage capacity
Min/Max/Average/Hold functions for easy data analysis
Auto power off saves battery life
|
Air Quality Testers
|
|
|
Fluke 884X-ETH Ethernet Interface Cable
|
|
8-conductor (4 twisted pair) unshielded cable (48 inches) with an 8-position modular plug (RJ45) on each end, with an overmold boot/strain relief
Rated working voltage: 100 V rms maximum
Operating temperature range: -40 ºC to +80 ºC
|
Cables & Hardware
|
|
|
Fluke Networks JackRapid Punchdown Termination Tools
|
|
Reduces installation time - Easy-to-use tool seats and cuts all wires at once
Increases productivity – install jacks 8 times faster
Accurate, clean and consistent cuts and terminations - no more wasted jacks
Built-in bed helps hold jack in place
Eliminates user fatigue with its ergonomic handle and convenient, built-in stripper
Future proof with replaceable blade heads for use with multiple vendor jack types
Unique design easily accommodates close-to-wall installations
|
Tools and Test Kits
|
|
|
Fluke 8808A 120V, 5.5 Digital Bench Multimeter
|
|
5.5 digit resolution
Dual Display
Measures V dc/ac, I dc/ac, Ω, Freq, Continuity, Diode
Basic V dc accuracy of up to 0.015%
Min, Max, Rel, dB, dBm
2x4 Wire Ohms measurement technique
Dedicated dc leakage current ranges
Six dedicated buttons for fast access to instrument setups
Hi/Lo limit compare for Pass/Fail testing
|
Benchtop Multimeters
|
|
|
Fluke C115 Soft Carrying Case
|
|
Includes two padded pockets for protection of two test tools, such as a digital multimeter and 60 Series IR thermometer and a pouch for test leads and other accessories.
Durable polyester 600D case construction for long life.
Compatible with Fluke 20, 70, 11X, 170 Series digital multimeters and other similar format test tools.
One-year warranty.
|
Cases and Holsters
|
|
|
Fluke 700-IV Current Shunt
|
|
Very accurate current shunt to use for verification and calibration of process control loops.
Can be used with accurate voltmeters for calibration purposes
Can be used with Fluke 74X series in mA/mA applications (74X will display mA/mA automatically) One year warranty
|
Connectors
|
|
|
Fluke 705 Loop Calibrator
|
|
A large display and simple, pushbutton interface for ease of use.
Simultaneous mA and % readout for quick, easy interpretation of readings.
mA accuracy of 0.02%
Push button 25% steps for fast, easy linearity checks. Save time over traditional knob type controls.
"Span Check" for fast confirmation of zero and span.
Selectable slow ramp, fast ramp, and step to provide smooth outputs for valve slewing and loop functional tests.
24 volt internal loop supply, so you can power and read a... |
Calibrators
|
|
|
Fluke 80i-110s AC/DC Current Clamp
|
|
Current Range: 0.1 to 100A DC or 0.1 to 70A AC
Basic Accuracy (DC to 1kHz):
100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA
10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA40A to 80A +/- 12% of reading + 50mA80 to 100A +/- 15% of reading
Output Signal: 10A range: 100mV/A | 100A range: 10mV/A
Bandwidth: 1Hz to 20kHz
Working Voltage: 600V AC rms
Maximum Conductor Size: 1.8 mm (.46 inch) diameter
Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II,... |
Current Clamps
|
|
|
Fluke FOM Fiber Optic Meter
|
|
The compact FOM plugs into your DMM and makes testing in tight spaces easy
A variety of light sources (FOS 850, FOS 1300, and FOS 850/1300) and patch cords (ST to ST, ST to FC, ST to SC, ST to SMA) let you get just what you need for testing different cable types and lengths
Highly accurate readings mean less work, less repeated testing
Input connector: fixed ST
Battery life: 16 hours minimum, 9V alkaline
LED low battery indicator
Operating temperature: 0°C to +40°C (32°F to... |
Fiber Optics
|
|
|
Fluke Priority Gold Instrument CarePlan For Thermal Imagers
|
|
Repairs are always unexpected, and they can be costly. Keep your camera in top operating condition and control your cost of ownership with a Fluke Gold CarePlan. Maintain you camera in peak operating condition and protect your investment beyond your factory warranty for up to three additional years. |
CarePlans & warranties
|
|
|
Fluke CO-205 Aspirator Kit
|
|
The CO-205 accessory kit includes:
Stainless steel sampling tube
Industrial-grade hand operated aspirator to draw flue sample
Easy to replace particulate filter
Specially designed nose cap for connection to the Fluke CO-210/220
4' (1.2m) hose length
|
Gas Measurement
|
|
|
Fluke 62 Max+ Infrared Thermometer with Dual-point Laser Sighting 30°C to 650°C, 12:1 ratio, ±1% Accuracy
|
|
Wide temperature range from -30° to 650°C (–20° to 1202°F)
12:1 distance-to-spot ratio
±1% Accuracy of the reading.
Dual lasers to accurately identify spot size
Rugged performance
Survives 9.8 foot/3 meter drops to wood floors
Water and dust resistance
IP54 rated to withstand rain, splashing liquids, dust and dirt
Small and easy to use
Ergonomic fit to "feel" good in your hand
Multi-angle
Backlit display
|
Combo Test Kits
|
|
|
Fluke 80K-6 High Voltage Probe
|
|
A high voltage probe that allows a multimeter to measure up to 6,000V respectively.
Intended for low energy applications only
One year warranty
|
High Voltage Probes
|
|
|
Fluke 80i-110s AC/DC Current Clamp
|
|
Current Range: 0.1 to 100A DC or 0.1 to 70A AC
Basic Accuracy (DC to 1kHz):
100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA
10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA40A to 80A +/- 12% of reading + 50mA80 to 100A +/- 15% of reading
Output Signal: 10A range: 100mV/A | 100A range: 10mV/A
Bandwidth: 1Hz to 20kHz
Working Voltage: 600V AC rms
Maximum Conductor Size: 1.8 mm (.46 inch) diameter
Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II,... |
Current Clamp DMM Accys
|
|
|
Fluke L200 Probe Light
|
|
Small, rugged light easily attaches to any Fluke test probe
Bright white LED illuminates contact area
Frees both hands for work
120 hours of battery life
Uses 2 3-volt watch batteries
|
Lights for Probes and Hats
|
|
|
Fluke 373 True-RMS 600A/600V AC Clamp Meters
|
|
600 A ac current measurement with fixed jaw
600 V ac and dc voltage measurement
True-rms ac voltage and current for accurate measurements on non-linear signals
Resistance measurement to 6000Ω with continuity detection
1000 µF capacitance measurement
State of the art signal processing allows for use in noisy electrical environments while providing stable readings
Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch... |
Current Clamp Meters
|
|
|
Fluke 050-CLKT 2" (50mm) Infrared (IR) Window with Kwik Twist Cover
|
|
Viewing aperture diameter: 43 mm (1.7 in)
Viewing aperture area: 1452 mm2 (2.25 sq in)
Engineered and tested to withstand electric-arcs up to 50 kA for 30 cycles
Certified by UL & CSA for Type 3/12 (Outdoor) environments in North America and Canada, the C-Range windows are tested to withstand the long term aging effects of UV exposure
Certified by SIRA Certification IP65 (Outdoor) environments in Europe
The CLIRVU coating—exclusive to Hawk IR Windows—seals the optic prior to... |
Infrared (IR) Windows
|
|
|
Fluke 113 Utility Multimeter
|
|
VCHEK LoZ low impedance measurement function allows for simultaneous voltage or continuity testing
A large backlit display provides easy visibility in low-lit areas
True-rms ac for accurate measurements on non-linear loads
Record signal fluctuations using the Min/Max function
Integral holster with probe holders for easy storage
Auto and Manual ranging
Meets measurements category CAT III 600V and CAT IV 300V standards for a higher level of safety
The optional TPAK magnetic hanger allows... |
Digital Multimeters
|
|
|
Fluke Priority Gold Instrument CarePlan For Thermal Imagers
|
|
Repairs are always unexpected, and they can be costly. Keep your camera in top operating condition and control your cost of ownership with a Fluke Gold CarePlan. Maintain you camera in peak operating condition and protect your investment beyond your factory warranty for up to three additional years.
Priority Gold CarePlan features
One to Three year extended warranty coverage beyond your original factory warranty
Loaner camera on extended repair
One NIST traceable calibration included... |
Instrument CarePlans (for Thermal Imagers)
|
|